1SD210F2-MBN1200H45E2-H_Opt1 datasheet, PDF

Datasheet> All Categories > Module/solution> 1SD210F2-MBN1200H45E2-H_Opt1

1SD210F2-MBN1200H45E2-H_Opt1: DescriptionPower Management Modules 1SD210F2 IGBT Driver HVIC; CategoryModule/solution; File Size136KB，6 Pages; ManufacturerPower Integrations; Websitehttps://www.powerint.cn

Download Datasheet Parametric Compare View All

1SD210F2-MBN1200H45E2-H_Opt1 Online Shopping

Suppliers	Part Number	Price	MOQ	In stock
	1SD210F2-MBN1200H45E2-H_Opt1	-	-	View	Buy Now

1SD210F2-MBN1200H45E2-H_Opt1 Overview

Power Management Modules 1SD210F2 IGBT Driver HVIC

1SD210F2-MBN1200H45E2-H_Opt1 Parametric

Parameter Name	Attribute value
Product Category	Power Management Modules
Manufacturer	Power Integrations
RoHS	No
Product	IGBT Drivers
Input Voltage MAX	16.8 V
Output Voltage	-
Output Current	10 A
Switching Frequency	4.5 kHz
Maximum Operating Temperature	+ 85 C
Collector- Emitter Voltage VCEO Max	4.5 kV
Dimensions	156 mm x 79.5 mm
Fall Time	100 ns
Input Voltage MIN	15.5 V
Minimum Operating Temperature	- 40 C
Output Power	2 W
Packaging	Bulk
Rise Time	100 ns
Factory Pack Quantity	2

Preview

Download Datasheet

View All

1SD210F2

Data Sheet

1SD210F2-MBN750H65E2

Single-Channel SCALE Plug-and-Play IGBT

Driver

Ultra compact, high-performance driver for 2-level, 3-level and

multilevel converters

Abstract

The SCALE plug-and-play driver 1SD210F2-MBN750H65E2 is a compact

single-channel intelligent gate driver designed for Hitachi’s high-voltage

IGBTs of type MBN750H65E2. The driver features a fiber-optic interface and

a selectable operation mode via a jumper.

For drivers adapted to other types of high-power and high-voltage IGBT modules, refer

www.IGBT-Driver.com/go/plug-and-play

Product Highlights

Applications



Plug-and-play solution



Protects the IGBT from short-circuit failure



Active clamping of V

at turn-off



Extremely reliable; long service life



No electrolytic capacitors



Gate current up to –6A/+10A



Fiber-optic links



Monitoring of supply voltage and fiber optics



Switching frequency DC to max. 4.5kHz



Duty cycle 0... 100%



Suitable DC/DC power supply as separate unit



Shortens application development time

IGBT-Driver.com



Three/multi-level converters



Two-level converters



Medium-voltage converters



High-voltage applications



Industrial drives



Traction



Railroad power supplies



Wind-power converters



Radiology and laser technology



Research



Almost all other conceivable

applications

Page 1

1SD210F2

Data Sheet 1SD210F2-MBN750H65E2

Gate output

Turn-on gate resistor

g(on)

Turn-off gate resistor

g(off)

Footnotes to the key data

Supply voltages higher than those specified can lead to the destruction of the driver and protection

circuits on the output side. The gate-emitter voltage tracks the supply voltage. (Not regulated by

the gate drive unit.) The recommended DC/DC power supply ISO3116I with high-voltage insulation

capability is a suitable separate unit.

Static power consumption of the gate driver.

If the specified power consumption of the gate driver is exceeded on average, this indicates an

overload of the gate driver and the external DC/DC power supply ISO3116I.

Under-voltage monitoring of supply voltage of the gate driver. For a voltage lower than this limit,

the power modules are switched off.

This limit is due to active clamping. Refer to the “Description and Application Manual for 1SD210F2

SCALE High-Voltage IGBT Drivers”.

Pulse width of the direct output of the gate drive unit. (Excluding the delay of the gate resistors.)

Duration of blocking the command input (keeping the gate driver and the IGBT in the off-state)

after fault detection, i.e. power supply under-voltage lock out, or – only in 2-level mode – short-

circuit detection. (For three/multilevel mode, turn-off under the short-circuit condition is managed

by the host controller.)

The gate current is limited by on-board gate resistors.

Refers to the direct output of the gate drive unit. (Excluding the delay of the gate resistors.)

Including the delay of external fiber-optic links. Measured from the turn-on transition at direct

output of the gate drive unit (excluding the delay of the gate resistors) to the transition of the

status signal at the optical receiver on the host controller side.

Application-specific self-heating of gate drivers and IGBT modules, especially at high switching

frequency, must be taken into account. The switching frequency is usually limited due to the

switching losses of the IGBT modules. Because CONCEPT cannot predict how the drivers will be

incorporated in the user’s application, no binding recommended value for self-heating and thus for

the maximum useable output power can be given. It is therefore recommended to check the gate

driver’s ambient temperature within the system.

Including the delay of external fiber-optic links. Measured from the transition of the turn-on or

turn-off command at the optical transmitter on the host controller side to the direct output of the

gate drive unit. (Excluding the delay of the gate resistors.)

Including the delay of external fiber-optic links. Measured from the transition of the turn-on or

turn-off command at the optical transmitter on the host controller side to the transition of the

acknowledge signal at the optical receiver on the host controller side.

The transceivers required at the host controller side are not supplied with the gate driver. It is

recommended to use the same types as used in the gate driver. For product information refer to

www.IGBT-Driver.com/go/fiberoptics

The connector and cable to the DC/DC power supply are not supplied with the gate driver, but via

FCI Inc. Recommended crimp contact housing: order code 65039-032; recommended crimp

contacts: 5 pcs, order code 48236-002. Refer to

www.IGBT-Driver.com/go/fci

The recommended transmitter current at the host controller is 30-35mA, suitable for plastic optic

fibers with a length of less than 2.5 meters. A higher current may increase jitter or delay at turn-

off.

Remarks

Min Typ. Max

10.2

Units

10)

11)

12)

13)

14)

15)

16)

Page 4

INTELLIGENT POWER ELECTRONICS

1SD210F2-MBN1200H45E2-H_Opt1 Related Products

	1SD210F2-MBN1200H45E2-H_Opt1	1SD210F2-MBN750H65E2
Description	Power Management Modules 1SD210F2 IGBT Driver HVIC	Power Management Modules 1SD210F2 IGBT Driver HVIC
Product Category	Power Management Modules	Power Management Modules
Manufacturer	Power Integrations	Power Integrations
RoHS	No	No
Product	IGBT Drivers	IGBT Drivers
Input Voltage MAX	16.8 V	16.8 V
Output Current	10 A	10 A
Switching Frequency	4.5 kHz	4.5 kHz
Maximum Operating Temperature	+ 85 C	+ 85 C
Collector- Emitter Voltage VCEO Max	4.5 kV	6.5 kV
Dimensions	156 mm x 79.5 mm	156 mm x 79.5 mm
Fall Time	100 ns	100 ns
Input Voltage MIN	15.5 V	15.5 V
Minimum Operating Temperature	- 40 C	- 40 C
Output Power	2 W	2 W
Packaging	Bulk	Bulk
Rise Time	100 ns	100 ns
Factory Pack Quantity	2	2

Recommended Resources

Three primary color display circuit

Electronic mousetrap circuit

Various DA converters with simple structure c

FET power amplifier with output transformer02

L292 extended output current circuit

3KW thyristor DC speed regulating system circuit

I bought a ZT303 multimeter.: A few days ago, I took advantage of the 30% off for 3 items promotion on JD.com and bought a ZT303 4.5-digit multimeter. The original price was 175, but after buying a few stainless steel screws with ...; dcexpert DIY/Open Source Hardware

Design techniques for machine learning algorithm generation (provided by ST official, Chinese subtitles): The head of artificial intelligence at ST in Asia Pacific explains some key concepts and tips to pay attention to when starting a new machine learning project design. Everyone is welcome to post quest...; nmg MEMS sensors

Add a startup program to the itop4412 development board: [size=4]1. Write the code first, taking helloworld.c as an example, copy code 1 #include2 #include//What is this file? 3 main() 4 { 5 int i = 0; 6 while(1) 7 { 8 sleep(2); 9 printf("hell0 world!"); 10...; Aguilera DSP and ARM Processors

IWR1642 Vehicle Occupant Detection Routine Problem: When I was running the vehicle occupant detection routine with IWR1642 It will prompt [Warning: Unexpected warning: A timeout occurred before the Terminator was reached.]At the same time, I see that t...; 夏微微咿呀哟 Special Edition for Assessment Centres

How can I use an oscilloscope to capture pulses within a certain time range, such as capturing waveforms between 100us and 200us?: How can I use an oscilloscope to capture pulses within a certain time range, such as capturing waveforms between 100us and 200us?...; 深圳小花 MCU

Next-generation wireless network standard technology HiperLAN/2: Because wireless networks are not limited by physical lines, they have advantages that wired networks cannot match. In response to the needs of wireless LAN applications, various manufacturers have la...; gaoyanmei RF/Wirelessly

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components