SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR surface mount transient suppressor
Features
Product Name: SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Product model: SMBJ6.5A
product features:
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Fast response time : Typically less than 1.0ps from 0 volt to BV min.
Typical IR less than 1uA above 10V
High temperature soldering guaranteed: 250℃/ 10 seconds at terminals
Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10×1000 us waveform by 0.01% duty cycle
Mechanical data:
Casea: molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard Pcakaging : 16mm tape (EIA STD RS-481)
Weight: 0.093 gram
Maximum Ratings and Electrical Characteristics:
Rating at 25℃ ambient temperature unless otherwise specified.
product data:
Peak Power Dissipation at Ta=25℃ Tp=1ms PPK Forward power consumption: Minimun 600W
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)- Unidirectional Only IFSM Forward surge current: 100A
Maximum Instaneous Forward Voltage at 100A for Unidirectional Only
VF Maximum forward voltage drop: 3.5/5.0 V
Operating and Storage Temperature Range Tj. Tstg Operating Junction Temperature: -65 to +150℃
Breakdown Voltage V(BR) Breakdown Voltage: Min: 7.22V Max: 7.98V
Test Current at IT Test current: 10mA
Stand-Off Voltage Vwm Stand-Off Voltage: 6.5V
Max Reverse Leakage at Vwm IR Maximum reverse leakage current: 500μA
Max Peak Pulse Current IPPM Maximum peak pulse current: 56A
Max Clamping Voltage at IPPM VC 最大箝位电压:11.2V
Package: SMB/DO214-AA
Parameter Name | Attribute value |
Is it Rohs certified? | conform to |
Maker | Yangzhou Yangjie Electronic Technology Co., Ltd. |
Reach Compliance Code | compli |
Breakdown voltage nominal value | 7.6 V |
Maximum clamping voltage | 11.2 V |
Diode type | TRANS VOLTAGE SUPPRESSOR DIODE |
polarity | UNIDIRECTIONAL |
Maximum repetitive peak reverse voltage | 6.5 V |
surface mount | YES |
Popular Components