SGM3157
4.5Ω Low Voltage SPDT
Analog Switch in 6-Pin SC70
GENERAL DESCRIPTION
The SGM3157 is a single, bidirectional, single-pole/
double-throw (SPDT) CMOS analog switch that is
designed to operate from a single +1.8V to +5.5V
supply. It features high-bandwidth (300MHz) and low
on- resistance (4.5Ω TYP), Targeted applications for
audio switching.
SGM3157 features guaranteed on-resistance matching
(0.3Ω
MAX)
between
switches
and
guaranteed
on-resistance flatness over the signal range (2.3Ω TYP).
This ensures excellent linearity and low distortion when
switching audio signals.
SGM3157 is available in Green SC70-6 package.
FEATURES
●
Voltage Operation: 1.8V to 5.5V
●
On-Resistance: 4.5Ω (TYP) at 5.0V
●
Fast Switching Times
t
ON
20ns
t
OFF
15ns
●
High Bandwidth: 300MHz
●
High Off-Isolation: -51dB at 10MHz
●
Rail-to-Rail Operation
●
TTL/CMOS Compatible
●
Break-Before-Make Switching
●
Extended Industrial Temperature Range:
-40℃ to +85℃
●
Available in Green SC70-6 Package
APPLICATIONS
Portable Instrumentation
Battery-Operated Equipment
Computer Peripherals
Cell Phones
PDAs
MP3s
PIN CONFIGURATION
(TOP VIEW)
SGM3157YC6
NO
GND
NC
1
6
IN
V+
COM
3157
2
3
5
4
SC70-6
FUNCTION TABLE
LOGIC
0
1
NO
OFF
ON
NC
ON
OFF
Switches Shown for Logic “0” Input
SG Micro Corp
www.sg-micro.com
REV. C. 1
SGM3157
PACKAGE/ORDERING INFORMATION
MODEL
SGM3157
PIN-
PACKAGE
SC70-6
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
ORDERING
NUMBER
SGM3157YC6/TR
4.5Ω Low Voltage SPDT
Analog Switch in 6-pin SC70
PACKAGE
MARKING
3157
PACKAGE
OPTION
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
V
+
, IN to GND.............................................................-0.3V to 6V
(1)
Analog, Digital voltage range
................... -0.3V to (V
+
) + 0.3V
Continuous Current NO, NC, or COM..............................±50mA
Peak Current NO, NC, or COM .......................................±80mA
Operating Temperature Range........................... -40℃ to +85℃
Junction Temperature........................................................150℃
NOTES:
1.
Signals on NC, NO, or COM or IN exceeding V
+
will be clamped by internal diodes. Limit forward diode current to maximum current
ratings.
2. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Storage Temperature Range.......................... -65℃ to +150℃
Lead Temperature (soldering, 10s)................................ 260℃
ESD (HBM).................................................................... 2000V
ESD (MM)........................................................................ 400V
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause
damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at
any time. Please contact SGMICRO sales office to get the latest datasheet.
PIN DESCRIPTION
NAME
NO
GND
NC
COM
V
+
IN
PIN
1
2
3
4
5
6
FUNCTION
Normally-Open Terminal.
Ground.
Normally-Closed Terminal.
Common Terminal.
Power Supply.
Digital Control Pin to Connect the COM Terminal to the NO or NC Terminals.
NOTE: NO, NC and COM
terminals
may be an input or output.
SG Micro Corp
www.sg-micro.com
2
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
