75781-021-24

5962-8954801PA amplifier basic information:

5962-8954801PA is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

5962-8954801PA amplifier core information:

The minimum operating temperature of 5962-8954801PA is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT APPLICABLE Maximum bias current at 25°C: 0.2 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of 5962-8954801PA is 3 V/us. The manufacturer specifies a maximum slew rate of 6 mA for the 5962-8954801PA and a minimum slew rate of 1 V/us. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the 5962-8954801PA gain becomes 0.707 times the low-frequency gain is 8000 kHz.

The nominal supply voltage of 5962-8954801PA is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15 V. The input offset voltage of 5962-8954801PA is 2000 µV (Input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of 5962-8954801PA is: 7.62 mm .

Related dimensions of 5962-8954801PA:

5962-8954801PA has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

5962-8954801PA amplifier additional information:

5962-8954801PA adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of 5962-8954801PA is: YES. Its temperature grade is: MILITARY. 5962-8954801PA is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of 5962-8954801PA is: DIP. The materials used in the 5962-8954801PA package are mostly CERAMIC and GLASS-SEALED.

The package shape is RECTANGULAR. The 5962-8954801PA package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.