SP3-2512-5

SP3-2512-5 amplifier basic information:

SP3-2512-5 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

SP3-2512-5 amplifier core information:

The minimum operating temperature of the SP3-2512-5 is 75 °C. Its maximum average bias current is 0.25 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of the SP3-2512-5 is 60 V/us. The manufacturer specifies a maximum slew rate of 6 mA for the SP3-2512-5 and a minimum slew rate of 40 V/us. Its minimum voltage gain is 7500. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the SP3-2512-5 gain becomes 0.707 times the low-frequency gain is 12000 kHz.

The nominal supply voltage of the SP3-2512-5 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of SP3-2512-5 is 10000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of SP3-2512-5:

The width of SP3-2512-5 is: 7.62 mm and the length is 11.176 mm. SP3-2512-5 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.

SP3-2512-5 amplifier additional information:

Its temperature grade is: COMMERCIAL EXTENDED. SP3-2512-5 is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The packaging code of SP3-2512-5 is: DIP. The materials used in SP3-2512-5 packaging are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. The form of SP3-2512-5 package pins is: IN-LINE. Its terminal form is: THROUGH-HOLE.