Part Number | Manufacturer | Description |
---|---|---|
Sorry, there is no alternative parts yet |
Basic information of ISL28218FUZ-T13 amplifier:
ISL28218FUZ-T13 is an OPERATIONAL AMPLIFIER from Intersil. Commonly used packaging methods are TSSOP, TSSOP8,.19
ISL28218FUZ-T13 amplifier core information:
The minimum operating temperature of the ISL28218FUZ-T13 is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.8 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28218FUZ-T13 is 1 V/us. The maximum slew rate of the ISL28218FUZ-T13 given by the manufacturer is 2.8 mA. Its minimum voltage gain is 562000. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28218FUZ-T13 gain becomes 0.707 times the low frequency gain is 3200 kHz. The power of ISL28218FUZ-T13 is NO. Its programmable power is NO.
The nominal supply voltage of ISL28218FUZ-T13 is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28218FUZ-T13 is 290 µV (Input offset voltage: the compensation voltage required between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of ISL28218FUZ-T13:
The width of ISL28218FUZ-T13 is: 3 mm, and the length is 3 mm. ISL28218FUZ-T13 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8, 8
ISL28218FUZ-T13 amplifier additional information:
ISL28218FUZ-T13 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It belongs to the low offset class of amplifiers. The frequency compensation status of ISL28218FUZ-T13 is: YES. Its temperature grade is: AUTOMOTIVE.
And its humidity sensitivity level is: 2. It is not a micropower amplifier. The corresponding JESD-30 code is: S-PDSO-G8. The corresponding JESD-609 code is: e3. The packaging code of ISL28218FUZ-T13 is: TSSOP.
The materials used in the ISL28218FUZ-T13 package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28218FUZ-T13 package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.
70232-N511 Also View
You may also be interested in
Popular Searches
Technical Videos