KA4558AI

Basic information of KA4558AI amplifier:

KA4558AI is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

KA4558AI amplifier core information:

The minimum operating temperature of KA4558AI is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.5 µA Its maximum average bias current is 1.5 µA

The maximum slew rate of the KA4558AI given by the manufacturer is 6 mA, while the minimum slew rate is 1.2 V/us. Its minimum voltage gain is 25000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the KA4558AI gain becomes 0.707 times the low-frequency gain is 3000 kHz.

The nominal supply voltage of KA4558AI is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of KA4558AI is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of KA4558AI:

The width of KA4558AI is: 7.62 mm and the length is 9.2 mm. KA4558AI has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

KA4558AI amplifier additional information:

KA4558AI adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of KA4558AI is: YES. Its temperature grade is: INDUSTRIAL. KA4558AI is not Rohs certified.

The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of KA4558AI is: DIP. KA4558AI packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The KA4558AI package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.