MAX479CPD

Basic information about MAX479CPD amplifier:

MAX479CPD is an OPERATIONAL AMPLIFIER. The commonly used packaging method is DIP,

MAX479CPD amplifier core information:

The minimum operating temperature of the MAX479CPD is 70 °C. Its peak reflow temperature is 240°C and its maximum average bias current is 0.007 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX479CPD has a nominal slew rate of 0.04 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX479CPD gain becomes 0.707 times the low-frequency gain is 85 kHz.

The nominal supply voltage of the MAX479CPD is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the MAX479CPD is 660 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX479CPD:

The width of MAX479CPD is: 7.62 mm and the length is 19.05 mm. MAX479CPD has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 14

MAX479CPD amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: 1. The MAX479CPD is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T14.

The corresponding JESD-609 code is: e0. The packaging code of MAX479CPD is: DIP. The materials used in the MAX479CPD package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MAX479CPD package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.572 mm.