LT1167AIS8#TR

Basic information of LT1167AIS8#TR amplifier:

LT1167AIS8#TR is an INSTRUMENTATION AMPLIFIER from Linear Technology. Commonly used packaging methods are SOP, SOP8,.25

LT1167AIS8#TR amplifier core information:

The minimum operating temperature of LT1167AIS8#TR is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is 235°C, its maximum average bias current is 0.0006 µA, and its maximum input offset current (IIO) is only 0.00055 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of LT1167AIS8#TR is 1.2 V/us. The maximum slew rate of LT1167AIS8#TR given by the manufacturer is 1.6 mA. Its maximum voltage gain is 10000 and the minimum voltage gain is 1. When the op amp is used in closed loop, at a certain specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1167AIS8#TR gain becomes 0.707 times the low-frequency gain is 1 MHz.

LT1167AIS8#TR的标称供电电压为15 V，其对应的标称负供电电压为-15 V。LT1167AIS8#TR的输入失调电压为75 µV（输入失调电压：使运算放大器输出端为0V(或接近0V)所需加于两输入端之间的补偿电压。）

LT1167AIS8#TR的相关尺寸：

LT1167AIS8#TR的宽度为：3.9 mm，长度为4.9 mmLT1167AIS8#TR拥有8个端子.其端子位置类型为：DUAL。端子节距为1.27 mm。共有针脚：8

LT1167AIS8#TR放大器其他信息：

其温度等级为：INDUSTRIAL。而其湿度敏感等级为：1。LT1167AIS8#TR不符合Rohs认证。其对应的的JESD-30代码为：R-PDSO-G8。其对应的的JESD-609代码为：e0。

LT1167AIS8#TR的封装代码是：SOP。LT1167AIS8#TR封装的材料多为PLASTIC/EPOXY。而其封装形状为RECTANGULAR。LT1167AIS8#TR封装引脚的形式有：SMALL OUTLINE。其端子形式有：GULL WING。

座面最大高度为1.75 mm。