TL072IYD

Basic information of TL072IYD amplifier:

TL072IYD is an OPERATIONAL AMPLIFIER from STMicroelectronics. Commonly used packaging methods are ROHS COMPLIANT, PLASTIC, MICRO, SOP-8

TL072IYD amplifier core information:

The minimum operating temperature of TL072IYD is -40 °C and the maximum operating temperature is 105 °C. Its peak reflow temperature is 260, its maximum bias current at 25°C is: 0.0002 µA, its maximum average bias current is 0.02 µA, and its maximum input offset current (IIO) is only 0.004 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TL072IYD is 16 V/us. The maximum slew rate of the TL072IYD given by the manufacturer is 2.5 mA, while the minimum slew rate is 8 V/us. Its minimum voltage gain is 25000. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TL072IYD gain becomes 0.707 times the low-frequency gain is 4000 kHz.

The nominal supply voltage of TL072IYD is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TL072IYD is 13000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TL072IYD:

The width of TL072IYD is: 3.9 mm and the length is 4.9 mm. TL072IYD has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

TL072IYD amplifier other information:

TL072IYD adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TL072IYD is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. TL072IYD is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e4. The packaging code of TL072IYD is: SOP.

The materials used for TL072IYD packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TL072IYD package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.