TL34072P

Basic information of TL34072P amplifier:

TL34072P is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, DIP-8

TL34072P amplifier core information:

The minimum operating temperature of the TL34072P is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 1.5 µA Its maximum average bias current is 1.8 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TL34072P is 10 V/us. The maximum slew rate of the TL34072P given by the manufacturer is 9.4 mA, while the minimum slew rate is 8 V/us. Its minimum voltage gain is 25000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TL34072P gain becomes 0.707 times the low-frequency gain is 4500 kHz.

The nominal supply voltage of TL34072P is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TL34072P is 7000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TL34072P:

The width of TL34072P is: 7.62 mm and the length is 9.81 mm. TL34072P has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

TL34072P amplifier additional information:

TL34072P adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of TL34072P is: YES. Its temperature grade is: COMMERCIAL. TL34072P is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-PDIP-T8. The packaging code of TL34072P is: DIP. The materials of TL34072P packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The TL34072P package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.