OP14CZ

Basic information of OP14CZ amplifier:

OP14CZ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HERMETIC SEALED, CERAMIC, DIP-8

OP14CZ amplifier core information:

The minimum operating temperature of OP14CZ is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.075 µA Its maximum average bias current is 0.1 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the OP14CZ has a nominal slew rate of 0.5 V/us. The minimum slew rate of OP14CZ given by the manufacturer is 0.25 V/us. Its minimum voltage gain is 50000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OP14CZ gain becomes 0.707 times the low-frequency gain is 1300 kHz.

The nominal supply voltage of OP14CZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of OP14CZ is 3000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of OP14CZ is: 7.62 mm.

Related dimensions of OP14CZ:

OP14CZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

OP14CZ amplifier additional information:

OP14CZ adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of OP14CZ is: YES. Its temperature grade is: INDUSTRIAL. OP14CZ is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-GDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of OP14CZ is: DIP. OP14CZ packaging materials are mostly CERAMIC, GLASS-SEALED.

The package shape is RECTANGULAR. The OP14CZ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.