MXL1007ACN8

Basic information of MXL1007ACN8 amplifier:

MXL1007ACN8 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, PLASTIC, DIP-8

MXL1007ACN8 amplifier core information:

The minimum operating temperature of the MXL1007ACN8 is 70 °C. Its peak reflow temperature is 245°C and its maximum average bias current is 0.045 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MXL1007ACN8 has a nominal slew rate of 2.5 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MXL1007ACN8 gain becomes 0.707 times the low-frequency gain is 8000 kHz.

The nominal supply voltage of the MXL1007ACN8 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the MXL1007ACN8 is 50 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of MXL1007ACN8:

The width of MXL1007ACN8 is: 7.62 mm and the length is 9.375 mm. MXL1007ACN8 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

MXL1007ACN8 amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: NOT APPLICABLE. MXL1007ACN8 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T8.

The corresponding JESD-609 code is: e0. The packaging code of MXL1007ACN8 is: DIP. The materials used in the MXL1007ACN8 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MXL1007ACN8 package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.572 mm.