INA110SG1

Basic information of INA110SG1 amplifier:

INA110SG1 is an INSTRUMENTATION AMPLIFIER from Texas Instruments. Commonly used packaging methods are METAL CAN, TO-100, 10 PIN

INA110SG1 amplifier core information:

The minimum operating temperature of INA110SG1 is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.00005 µA while its maximum input offset current (IIO) is only 0.000025 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of INA110SG1 is 17 V/us. The maximum slew rate of INA110SG1 given by the manufacturer is 4.5 mA. Its maximum voltage gain is 800 and its minimum voltage gain is 1. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the INA110SG1 gain becomes 0.707 times the low-frequency gain is 2.5 MHz.

The nominal supply voltage of INA110SG1 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of INA110SG1 is 550 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of INA110SG1:

The width of INA110SG1 is: 7.62 mm and the length is 20.32 mm. INA110SG1 has 10 terminals. Its terminal position type is: BOTTOM. Terminal pitch is 2.54 mm. Total pins: 10

INA110SG1 amplifier additional information:

Its temperature grade is: MILITARY. INA110SG1 is not Rohs certified. It contains lead. The corresponding JESD-30 code is: O-MBCY-W10. The packaging code of INA110SG1 is: DIP.

The material of INA110SG1 package is mostly METAL. And its package shape is ROUND. The INA110SG1 package pin format is: CYLINDRICAL. Its terminal form is: WIRE. The maximum seat height is 4.45 mm.