LF156AD

Basic information of LF156AD amplifier:

LF156AD is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are CERAMIC, DIP-8

LF156AD amplifier core information:

The minimum operating temperature of LF156AD is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00005 µA Its maximum average bias current is 0.025 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LF156AD has a nominal slew rate of 13 V/us. The manufacturer specifies a maximum slew rate of 7 mA for the LF156AD and a minimum slew rate of 10 V/us. Its minimum voltage gain is 25000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LF156AD gain becomes 0.707 times the low-frequency gain is 8000 kHz.

The nominal supply voltage of LF156AD is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15/+-20 V. The input offset voltage of LF156AD is 2500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Relevant dimensions of LF156AD:

LF156AD has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.

LF156AD amplifier additional information:

LF156AD adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of LF156AD is: YES. Its temperature grade is: MILITARY.

LF156AD is not Rohs certified. The corresponding JESD-30 code is: R-CDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of LF156AD is: DIP. The materials used in the LF156AD package are mostly CERAMIC, METAL-SEALED COFIRED.

The package shape is RECTANGULAR. The LF156AD package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.