TL072CDR

Basic information of TL072CDR amplifier:

TL072CDR is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are GREEN, PLASTIC, MS-012AA, SOIC-8

TL072CDR amplifier core information:

The minimum operating temperature of TL072CDR is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.007 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TL072CDR has a nominal slew rate of 13 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TL072CDR gain becomes 0.707 times the low-frequency gain is 3000 kHz.

The nominal supply voltage of TL072CDR is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TL072CDR is 13000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TL072CDR:

The width of TL072CDR is: 3.9 mm and the length is 4.9 mm. TL072CDR has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

TL072CDR amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: NOT APPLICABLE. It does not contain lead. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e4.

The packaging code of TL072CDR is: SOP. The materials used for TL072CDR packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TL072CDR package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING.

The maximum seat height is 1.75 mm.