LT1102ACN

Basic information of LT1102ACN amplifier:

LT1102ACN is an INSTRUMENTATION AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

LT1102ACN amplifier core information:

The minimum operating temperature of the LT1102ACN is and the maximum operating temperature is 70 °C. Its maximum average bias current is 0.00004 µA and its maximum input offset current (IIO) is only 0.00004 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1102ACN has a nominal slew rate of 17 V/us. The maximum slew rate of LT1102ACN given by the manufacturer is 5 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of LT1102ACN becomes 0.707 times the low-frequency gain. The frequency is 0.22 MHz.

The nominal supply voltage of the LT1102ACN is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of LT1102ACN is 600 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of LT1102ACN is: 7.62 mm.

Related dimensions of LT1102ACN:

LT1102ACN has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LT1102ACN amplifier additional information:

Its temperature grade is: COMMERCIAL. The LT1102ACN is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of LT1102ACN is: DIP.

The materials used in the LT1102ACN package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LT1102ACN package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 3.937 mm.