LMV712IDRCR

Basic information of LMV712IDRCR amplifier:

LMV712IDRCR is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SON-10

LMV712IDRCR amplifier core information:

The minimum operating temperature of the LMV712IDRCR is -40 °C and the maximum operating temperature is 85 °C. The maximum bias current at 25°C is: 0.000115 µA and the maximum average bias current is 0.00013 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LMV712IDRCR has a nominal slew rate of 5 V/us. The maximum slew rate of LMV712IDRCR given by the manufacturer is 3.8 mA. Its minimum voltage gain is 6300. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LMV712IDRCR gain becomes 0.707 times the low-frequency gain is 5000 kHz. The power of LMV712IDRCR is NO. Its programmable power is NO.

The nominal supply voltage of the LMV712IDRCR is 5 V. The power supply range is: 2.7/5 V. The input offset voltage of the LMV712IDRCR is 3200 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LMV712IDRCR:

The width of LMV712IDRCR is: 3 mm, and the length is 3 mm. LMV712IDRCR has 10 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.5 mm. Total pins: 10

LMV712IDRCR amplifier additional information:

LMV712IDRCR adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of LMV712IDRCR is: YES. Its temperature grade is: INDUSTRIAL.

It is not a micropower amplifier. The corresponding JESD-30 code is: S-PDSO-N10. The packaging code of LMV712IDRCR is: HVSON. LMV712IDRCR packaging materials are mostly PLASTIC/EPOXY. The package shape is SQUARE.

LMV712IDRCR package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD. The maximum seat height is 1 mm.