PM1012AZ

Basic information of PM1012AZ amplifier:

PM1012AZ is an OPERATIONAL AMPLIFIER. The commonly used packaging method is DIP,

PM1012AZ amplifier core information:

The minimum operating temperature of PM1012AZ is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.00035 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the PM1012AZ has a nominal slew rate of 0.15 V/us. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the PM1012AZ gain becomes 0.707 times the low-frequency gain is 500 kHz.

The nominal supply voltage of PM1012AZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of PM1012AZ is 250 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of PM1012AZ is: 7.62 mm.

Relevant dimensions of PM1012AZ:

PM1012AZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

PM1012AZ amplifier additional information:

Its temperature grade is: MILITARY. And its humidity sensitivity level is: NOT SPECIFIED. PM1012AZ is not Rohs certified. The corresponding JESD-30 code is: R-GDIP-T8. The packaging code of PM1012AZ is: DIP.

The materials used for PM1012AZ packaging are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR. The PM1012AZ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.