ICL7642BMJD/HR

Basic information of ICL7642BMJD/HR amplifier:

ICL7642BMJD/HR is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, CERAMIC, DIP-14

ICL7642BMJD/HR amplifier core information:

The minimum operating temperature of ICL7642BMJD/HR is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 24025°C. Its maximum bias current is: 0.00005 µA. Its maximum average bias current is 0.0004 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ICL7642BMJD/HR is 0.016 V/us. The maximum slew rate of the ICL7642BMJD/HR given by the manufacturer is 0.088 mA. Its minimum voltage gain is 5000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ICL7642BMJD/HR gain becomes 0.707 times the low-frequency gain is 44 kHz.

The nominal supply voltage of ICL7642BMJD/HR is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of ICL7642BMJD/HR is 7000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Relevant dimensions of ICL7642BMJD/HR:

The width of ICL7642BMJD/HR is: 7.62 mm and the length is 19.05 mm. ICL7642BMJD/HR has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 14

ICL7642BMJD/HR amplifier additional information:

ICL7642BMJD/HR adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of ICL7642BMJD/HR is: YES. Its temperature grade is: MILITARY.

And its humidity sensitivity level is: 1. It is a micropower amplifier. ICL7642BMJD/HR is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-GDIP-T14.

The corresponding JESD-609 code is: e0. The packaging code of ICL7642BMJD/HR is: DIP. The materials used in the ICL7642BMJD/HR package are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR. The ICL7642BMJD/HR package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.842 mm.