MCP603-I/ST

MCP603-I/ST amplifier basic information:

MCP603-I/ST is an operational amplifier - operational amplifier (Op Amps - Operational Amplifiers) from Microchip. It belongs to the MCP603 series of products.

MCP603-I/ST amplifier core information:

The minimum operating temperature of the MCP603-I/ST is - 40 C and the maximum operating temperature is + 85 C. The corresponding working power supply current is 23 uA. The output current of each channel is: 22 mA.

The MCP603-I/ST has a power supply rejection ratio of 80 dB. (Power supply rejection ratio (PSRR): An indicator used to determine the impact of the amplifier output on the power supply. PSRR = 20log[(Ripple(in) / Ripple(out))], that is, the larger the value, the less the amplifier output is affected by the power input. The smaller it is. ) Its voltage gain is 115 dB. The gain bandwidth product (GBP, Gain Bandwidth Product) of the MCP603-I/ST is 2.8 MHz. As a parameter to simply measure the performance of the amplifier, if you are not only choosing your amplifier, you can use this as a relatively simple measure. index. The corresponding input voltage noise density is 29 nV/sqrt Hz and the corresponding input noise current density is 0.0006 pA/sqrt Hz.

When a voltage difference of 2 mV is applied between the input pins of the MCP603-I/ST, the output voltage of this amplifier is 0V. (That is, its input bias voltage is 2 mV)

Related dimensions of MCP603-I/ST:

The width of MCP603-I/ST is: 4.4 mm, the length is 3 mm, and the total number of channels (Number of channels): 1 Channel.

MCP603-I/ST amplifier additional information:

Its more detailed single package form is: TSSOP-8. When suppliers on the market sell MCP603-I/ST, they use the form: Tube.