CA1558E

CA1558E amplifier basic information:

CA1558E is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

CA1558E amplifier core information:

The minimum operating temperature of the CA1558E is -55 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.5 µA Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of CA1558E is 0.5 V/us. The maximum slew rate of the CA1558E given by the manufacturer is 3.3 mA. Its minimum voltage gain is 25000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the CA1558E gain becomes 0.707 times the low-frequency gain is 900 kHz.

The nominal supply voltage of the CA1558E is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the CA1558E is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of CA1558E:

The width of CA1558E is: 7.62 mm and the length is 9.585 mm. CA1558E has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

CA1558E amplifier additional information:

CA1558E adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of CA1558E is: YES. Its temperature grade is: MILITARY. CA1558E is not Rohs certified.

The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of CA1558E is: DIP. The materials used in the CA1558E package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The CA1558E package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.33 mm.