ISL28117FRTBZ-T

ISL28117FRTBZ-T amplifier basic information:

ISL28117FRTBZ-T is an OPERATIONAL AMPLIFIER. The commonly used packaging method is HVSON,

ISL28117FRTBZ-T amplifier core information:

The ISL28117FRTBZ-T has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.0015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28117FRTBZ-T is 0.5 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28117FRTBZ-T gain becomes 0.707 times the low-frequency gain is 1500 kHz.

The nominal supply voltage of the ISL28117FRTBZ-T is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28117FRTBZ-T is 160 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)

Relevant dimensions of ISL28117FRTBZ-T:

The width of ISL28117FRTBZ-T is: 3 mm and the length is 3 mm. ISL28117FRTBZ-T has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

ISL28117FRTBZ-T amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 3. ISL28117FRTBZ-T is not Rohs certified. The corresponding JESD-30 code is: S-PDSO-N8. The corresponding JESD-609 code is: e3.

The package code of ISL28117FRTBZ-T is: HVSON. The materials for the ISL28117FRTBZ-T package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28117FRTBZ-T package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD.

The maximum seat height is 0.8 mm.