Part Number | Manufacturer | Description |
---|---|---|
Sorry, there is no alternative parts yet |
UPC4572C(5) amplifier basic information:
UPC4572C(5) is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3
UPC4572C(5) amplifier core information:
The UPC4572C(5) has a minimum operating temperature of -20 °C and a maximum operating temperature of 80 °C. Its peak reflow temperature is 22525°C. Its maximum bias current is: 0.2 µA. Its maximum average bias current is 0.2 µA.
How to simply check the efficiency of an amplifier? Looking at its slew rate, the UPC4572C(5) has a nominal slew rate of 6 V/us. The manufacturer specifies a maximum slew rate of 5.5 mA for the UPC4572C(5) and a minimum slew rate of 3.5 V/us. Its minimum voltage gain is 30000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the UPC4572C(5) gain becomes 0.707 times the low-frequency gain is 9000 kHz. The power of UPC4572C(5) is NO. Its programmable power is NO.
The UPC4572C(5) has a nominal supply voltage of 5 V. The power supply range is: +-2/+-7/4/14 V. The input offset voltage of UPC4572C(5) is 1500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)
Related dimensions for UPC4572C(5):
The width of UPC4572C(5) is: 7.62 mm and the length is 10.16 mmUPC4572C(5) has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8
UPC4572C(5) amplifier additional information:
UPC4572C(5) adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of UPC4572C(5) is: YES. Its temperature grade is: COMMERCIAL EXTENDED.
And its humidity sensitivity level is: 1. It is not a micropower amplifier. UPC4572C(5) is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The packaging code of UPC4572C(5) is: DIP.
UPC4572C(5) packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The UPC4572C(5) package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.
UPC4572C(5) Also View
You may also be interested in
Popular Searches
Technical Videos