Leakage current protection circuit
Source: InternetPublisher:酷到被通缉 Keywords: Protection circuit leakage current current protection current transformer Updated: 2020/11/20
The leakage current protection circuit is a traditional electromagnetic tripping device. It directly accepts the signal from the zero-sequence current transformer and has high sensitivity
. Generally, boron uses a polarized electromagnet and can operate when the leakage current reaches 30mA. When there is no leakage current, the permanent magnet of the leakage release will
attract the armature and it will be in normal working condition. When the protected circuit leaks to the ground, the current input from the secondary winding of the zero-sequence current transformer to the tripper coil
generates magnetic flux, which offsets the magnetic flux of the permanent magnet within half a cycle, and the armature is released by the tension of the spring. , the tripper operates and
the relay contacts are connected or disconnected within 0.1s. Adjust the spring so that there is a certain gap between the armature and the yoke, then the operating current can be adjusted.
- A small improvement on the ordinary refrigerator motor starting circuit
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Star-delta step-down starting control circuit for squirrel cage asynchronous motor
- Working principle of ZNB-S digital display intelligent motor protector control circuit
- Design and production of radio remote control fan stepless speed regulator
- Design and analysis of wire control circuit
- Light-controlled circuit design and analysis
- Infrared detection alarm
- Practical electric curtain remote control device
- Add a breeze block to your remote control wall fan
- Protection circuit using uPC1237 chip
- Longitudinal differential protection circuit
- Transformer gas protection circuit
- Thyristor resistance-capacitance protection circuit c
- Thyristor resistance-capacitance protection circuit b
- The structure and working principle diagram of various protection circuits b
- Stabilized power supply undervoltage protection circuit
- Series regulated power supply circuit protection circuit 2
- One of the mains undervoltage and overvoltage protection circuits
- Overcurrent protection circuit for generator low voltage start b