Interface circuit composed of 8051 single chip microcomputer and 74LS165
Source: InternetPublisher:Lemontree Keywords: Microcontroller Updated: 2024/07/19
The figure below shows the interface circuit between 8051 microcontroller and 74LS165. The serial port of 8051 microcontroller works in mode 0, which is synchronous shift register input/output mode. The data received/sent is 8 bits, with the low bit first, and there is no start bit, parity bit and stop bit.
Serial data is input from RXD (P3.0), and the shift clock is output from TXD (P3.1). Port line P1.7 is used to control the working state of 74LS165. When P1.7 outputs a low level, 74LS165 puts parallel data into the register; when P1.7 outputs a high level, 74LS165 works in a serial shift state under clock control, and data is shifted into the 8051 microcontroller through RXD (P3.0).
- Improved circuit diagram of 8050 transistor emitter drive relay
- Digital signal isolation interface circuit
- How to make a numeric keyboard using XIAO RP2040
- How to Design a Fan Cooling System Using a Microcontroller
- SST89C58 electronic disk circuit and code
- Interface circuit between digital measuring tool and 51 microcontroller
- Interface and program design between digital potentiometer X9241 and PIC microcontroller
- Computer remote control circuit
- Circuit diagram of RS232-TTL-RS485
- Bus contactless IC card reader circuit schematic diagram
- Some notes on electronic design
- Reset circuit design of the smallest microcontroller system
- Dual audio decoding electronic circuit
- Design of infrared communication circuit based on single chip microcomputer
- Microcontroller control circuit
- Stepper motor drive circuit composed of LB1836M
- Negative voltage generation circuit diagram
- Microcontroller measurement circuit
- Optoelectronic interface circuit between single-channel DA chip DAC0832 and microcontroller
- Typical circuit for connecting MAX1101 and microcontroller