Home > Other > Typical application circuit diagram of DC/DC converter composed of SI9114

Typical application circuit diagram of DC/DC converter composed of SI9114

Source: InternetPublisher:小胖友 Updated: 2020/02/18

Typical application circuit diagram of DC/DC converter composed of SI9114

As shown in the figure above, pin 12 is the driving pin, and the output driver uses N-channel and P-channel complementary output stages. The output driver typically pulls 400mA and sinks 700mA. Pin 13 is the current detection terminal, and the current detection comparator realizes the current mode control function through the output of the error amplifier and the current in the output inductor. Due to the reverse recovery of the rectifier, the equivalent capacitive load of the secondary coil and the influence of the inductor and capacitance, there are often burrs at the front edge of the measured current waveform, which is the noise level. This can be controlled by using a simple RC network. Generally, a low The filter circuit prevents distortion of the entire waveform.



EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号