CB signal transmitter-oscilloscope coupler
Source: InternetPublisher:拳制龙 Keywords: RF power communication power supply Updated: 2020/09/06
To display an RF signal, connect L1 to the transmitter and click A and B to the vertical plates of the oscilloscope. Adjust L1 to the minimum SWR and adjust C3 to the desired tracking height on the CRT. L2=4, open 3/4 plug tuning RF coil form, L1=3, adjacent to L1, ground terminal of C1, C2= 5pF, C3=75pF trimmer.
Latest Power Circuits Circuits
- Fabrication of multi-cell lithium battery charging circuit
- Lithium battery overcharge, over discharge, short circuit protection circuit design
- Recommended circuits for different power on times of LM4911
- Offline 8w LED Flyback Power Supply with PFC using NCP1014
- The constant current source composed of two transistors can drive high power
- Using CW34603 to form a circuit to change the polarity of the output power supply
- LM317 regulated power supply
- Electric bicycle battery charger circuit
- Constant current charger using light emitting diode as voltage regulator
- LM317T voltage regulation adjustable circuit diagram explanation
Popular Circuits
- CB signal transmitter-oscilloscope coupler
- Solar power circuit
- Typical Reference Voltage and Power Supply Circuits
- Power circuit of LBO-522 dual trace oscilloscope
- Three-way DC-DC converter circuit
- 3-phase CPU power circuit using HIP6301 and HIP6601 chips
- One of the transistor stabilized current power supply circuits
- RF remote control switch receiving circuit
- Remote control TV doorbell power circuit
- SL517 (electronic toys) audio, radio frequency or infrared decoding circuit
京公网安备 11010802033920号