How to use PA power analyzer to perform a perfect test on the power supply?
Source: InternetPublisher:aerobotics Keywords: Power supplies power analyzers Updated: 2021/01/06
The editor below will introduce to you a device for measuring power supply, the PA power analyzer. The PA power analyzer can accurately measure the output voltage, current, power, harmonics and conversion efficiency of the power supply. Zhiyuan's PA5000H power analyzer With 0.05% power measurement accuracy, 5MHz bandwidth and rich harmonic measurement functions, it is widely used in the R&D and testing of power supply products.
1. Power analyzer—electrical parameter test
The power analyzer focuses on steady-state testing. The power analyzer can test AC input and DC output at the same time, conduct synchronous analysis of overall energy efficiency and electrical parameters, and test input and output voltage, current, test voltage, current effective value, power factor, Efficiency, harmonics, etc., as shown in Figure 3.
Figure 1 Electrical parameter test
2. Power analyzer—efficiency and power factor testing
The power analyzer tests the AC input power and DC output power, and sets the electronic load from no load to full load. Using the XY display mode of the power analyzer, you can directly test the efficiency and power factor curves from no load to full load.
Figure 2 Efficiency curve chart
Figure 3 Power factor curve graph
3. Power analyzer—IEC harmonic test
Electrical products will be tested for harmonics according to the IEC61000-3-2 and IEC61000-3-11 standards to verify whether they meet the standard requirements. The PA power analyzer can measure up to 500 harmonics, and has multiple combination display methods to simultaneously Displays the harmonic content of each order.
4. PA power analyzer—impulse current test
Usually, a large current will be generated at the moment when the load is energized. Excessive current will affect the normal operation of the equipment. The PSA programmable AC power supply can be used to simulate the voltage conditions when the output startup phase is at 0°, 90° and 270°, and the PA power analyzer can be used to test the startup surge current of electronic products.
Figure 4 Inrush current test
- ISO113 circuit that can reduce power consumption
- BA6104 five-digit LED level meter driver integrated circuit basic application circuit
- Detailed explanation of 5v charger circuit diagram
- An ultra-low output voltage regulator
- Car power 1.5V-12V six-speed converter
- Adjustable voltage power socket
- USB power socket using the car battery
- Solar Charger
- Filter protection circuit and slow-start circuit principle of secondary power supply circuit in communication system
- LT1173 Wind Turbine Generator Charge Controller
- Provides USB Type-C® port chip solutions for lithium battery-powered devices
- How to ensure that the power supply works efficiently for a long time?
- Analysis of the advantages and disadvantages of electrolytic capacitor-free LED power supply
- What is the general technical route for reducing stroboscopic flicker during the de-powering process of LEDs?
- For Schottky rectification, what are the advantages of synchronous rectification?
- What is the difference between an adapter and a charger?
- Do you know the possible factors that cause the power adapter to be damaged?
- Circuit design considerations
- EMC design component selection and circuit design are critical
- Set timing circuit when power is on