Why does this problem occur when the AD16 schematic is imported into the PCB? Can anyone help me solve it?

王智体

Why does this problem occur when the AD16 schematic is imported into the PCB? Can anyone help me solve it? [Copy link]

AD16 has import problems

qwqwqw2088

Online DRC has too many things to check. It is recommended to remove the online DRC and use screenshot software to see it clearly.

qwqwqw2088

After drawing the schematic diagram with AD software, compile it directly in the schematic working environment by selecting Project--Compile Document ... .SchDoc. If there are errors or warnings, you can view them in detail in System---Messages in the lower right corner. Double-click the specific error or warning to see the location of the specific error or warning.

王智体

qwqwqw2088 posted on 2018-9-23 20:54 There are too many things to check in online drc. It is recommended to remove online drc and use screenshot software to take screenshots to see clearly

Hi, I have another question. After I imported the schematic into pcb, the components were scattered far away, which is the second picture.

qwqwqw2088

Wang Zhiti posted on 2018-9-23 21:55 Hello, I have another question. After I imported the schematic diagram into PCB, the components were scattered far away, which is the second picture

Before importing, you can draw an outer frame in the newly created PCB diagram or use the middle mouse button to scroll to zoom in and out, delete room, etc.

王智体

OK, thank you.

LuJianchang

Wang Zhiti posted on 2018-9-23 21:55 Hello, I have another question. After I imported the schematic diagram into the PCB, the components were scattered very far away, which is the second picture

. Did you not set the origin when you drew the package?