I just learned Allegro software, and Allegro always makes mistakes when importing netlists

0615

I just learned Allegro software, and Allegro always makes mistakes when importing netlists [Copy link]

出错如下
#1   ERROR(24) File not found
     Packager files not found

#2   ERROR(102) Run stopped because errors were detected

netrev run on Jun 30 10:43:48 2011

   COMPILE 'logic'
   CHECK_PIN_NAMES OFF
   CROSS_REFERENCE OFF
   FEEDBACK OFF
   INCREMENTAL OFF
   INTERFACE_TYPE PHYSICAL
   MAX_ERRORS 500
   MERGE_MINIMUM 5
   NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'
   NET_NAME_LENGTH 24
   OVERSIGHTS ON
   REPLACE_CHECK OFF
   SINGLE_NODE_NETS ON
   SPLIT_MINIMUM 0
   SUPPRESS   20
   WARNINGS ON

  2 errors detected
No oversight detected
No warning detected

我检查了原理图DRC检测没出错

hdwcyzyy

It seems that the path to import the netlist is not selected correctly. Just search Baidu for it.

szy123

If the package is not found, check whether your package library path is set correctly, and whether the package name in the package folder is consistent with the package name in your schematic (see the PSM file

0615

szy123 posted on 2018-8-7 16:46 The package was not found. Check if your package library path is set correctly. Then check if the package name in the package folder is the same as the package name in your schematic...

Is the psm file case-sensitive?

0615

It's done, thank you everyone

qingermeimei99

0615 posted on 2018-8-9 16:17 Done, thank you all

Can you share how to solve it? I have the same problem.

Marchera

Reset the package pad path