Alda H-30T High Temperature Sleep Version Constant Temperature Electric Soldering Iron - Sleep Evaluation

ltbytyn

Alda H-30T High Temperature Sleep Version Constant Temperature Electric Soldering Iron - Sleep Evaluation [Copy link]

I actually tried the hibernation function last week, but I've been busy lately so I've put it off until now.

1. When the soldering iron is idle, the light on the cable control box flashes for a long time, about once every 7 or 8 seconds, and the temperature of the soldering iron tip is about 80 degrees (tested by quickly touching it with a human hand, just an estimate).

2. After using the soldering iron, the light on the cable control box flashes in a very short period of time, which is of course related to the temperature. At 400 degrees, the flashing frequency is about ms level.

971482bf30aa98899a1de2cc205e03d5

I don't understand how it detects human touch, except for the red release?

During the test, there was no place to put the soldering iron, so I found a soldering iron stand in the laboratory for temporary use. In fact, it would be perfect if the electric soldering iron could be equipped with a simple soldering iron stand.