Can the rain test chamber test the standards of generators?

林频仪器

Can the rain test chamber test the standards of generators? [Copy link]

　　The rain test box is used to test the IPX3 or IPX4 waterproof level of the product through oscillating pipe rain, the purpose is to test whether the product has waterproof performance.

　　Today, I saw some users asking: If you want to test the IPX34 level of the generator's rain test, what is its test standard? Based on this question, the editor will analyze it as follows:

　　In fact, the rain test box is divided into three different models in appearance, namely ipx34 swing tube rain test device, open type and box type, all of which are suitable for grade testing of electronic samples of various sizes.

　　Equipment ipx34 test standard: its nozzle size: diameter 0.4mm; flow rate: 1.8L/min±0.05 (IPX3); 6L/min±0.05 (IPX4); swing pipe angle: 120 (IPX3); 350 (IPX4); swing pipe swing speed: 120° back and forth 4S (IPX3); 350° back and forth 12S (IPX4);

　　In order to facilitate product design, improvement, verification and factory inspection, the generator can be subjected to a rain test in a rain test box to determine whether the product performance meets the requirements.

　　The above is an introduction to whether the rain test chamber can test the generator test standards, so let’s share it here first.