LFPT1000 pipeline based multi-parameter test system

北京莱森泰克

LFPT1000 pipeline based multi-parameter test system [Copy link]

System Overview:

LFPT1000 realizes the independent control of pressure and flow rate based on the pipeline multi-parameter test system, as well as the dual control function of pressure and flow rate. At the same time, the system also has the static pressure test function; and mainly tests the static and dynamic pressure loss of the cooling water channel of the automotive electric drive system. During the dynamic test, the flow rate and pressure can be controlled, and the currently designed motor and controller can be tested. The system consists of a water pump, frequency conversion, LSPTS, water tank, high-precision flow meter, high-precision pressure gauge, electronic control unit, and operating software.

Technical indicators:

1. Temperature: 5~40℃,
2. Medium: pure water or non-corrosive liquid.
3. Flow range: 0-20L/Min
4. Pressure range: 0-3 bar.
5. Working voltage: 220VAC10A.
6. Equipment size: L*H*W 1700*1700*900,
7. Weight: about 220kg, water consumption: 58L

System Purpose:

This system is used to test the inlet and outlet pressure and flow values in the equipment. It is suitable for production enterprises and measurement units to verify the pressure and flow of the equipment under test. As well as flow control system design, automotive research institutes, automotive motor housings, automotive motor controllers and other equipment research and production units. It is also suitable for measurement units to test the standard calibration system of flow resistance systems. Such as testing automotive parts, motor housings, controllers and other equipment, engine cooling systems, etc.

See below:

System Purpose:

This system is used to test the inlet and outlet pressure and flow values in the equipment. It is suitable for production enterprises and measurement units to verify the pressure and flow of the equipment under test. As well as flow control system design, automotive research institutes, automotive motor housings, automotive motor controllers and other equipment research and production units. It is also suitable for measurement units to test the standard calibration system of flow resistance systems. Such as testing automotive parts, motor housings, controllers and other equipment, engine cooling systems, etc.

See below:

System Purpose:

This system is used to test the inlet and outlet pressure and flow values in the equipment. It is suitable for production enterprises and measurement units to verify the pressure and flow of the equipment under test. As well as flow control system design, automotive research institutes, automotive motor housings, automotive motor controllers and other equipment research and production units. It is also suitable for measurement units to test the standard calibration system of flow resistance systems. Such as testing automotive parts, motor housings, controllers and other equipment, engine cooling systems, etc.