[RTT & Renesas High-Performance CPK-RA6M4] After adding a serial port to the automatically created project, the file board.h cannot be found

kit7828

[RTT & Renesas High-Performance CPK-RA6M4] After adding a serial port to the automatically created project, the file board.h cannot be found [Copy link]

After RT-Thread automatically creates a project based on the development board, it compiles directly without errors. Uart0 is enabled in RTT Settings, g_uart0 is added in the graphical interface of FSP, and the pins are set. After the update, the compilation fails to find the header file board_cfg.h.

Some netizens said that these two header files are in the same path, bsp_cfg.h and board_cfg.h. Netizens who have this file, please upload one.

Jacktang

Thumb up and wait for other netizens to upload

RCSN

You can find this file in the installation directory of rtthread studio, search it, because there is a pack sdk package in the installation directory

kit7828

RCSN posted on 2022-5-19 08:21 You can find this file in the installation directory of rtthread studio, search it, because there is a pack sdk package in the installation directory

Thank you very much. I solved it according to the method you provided.

RCSN

kit7828 posted on 2022-5-19 10:24 Thank you, I solved it according to the method you provided.

You're welcome

lugl4313820

For this, you need to manually add the path to the folder where the included board.h is located.