AD9 usage issues

呜呼哀哉

AD9 usage issues [Copy link]

 

After AD9 changes the component number in the schematic diagram and updates the PCB, the component with the changed number will move to the lower right corner of the boardshape by itself. How can I keep it in the same position?

What's even more strange is that the project file copied from someone else's computer can be updated on my AD9 according to the above steps. Is there some setting in the project file that is different?

okhxyyo

On the schematic, remember, it is in the schematic, double-click the component that will change position, click the Reset button to the right of the Unique id, click OK to close, update the PCB again, and the position will not change.

呜呼哀哉

This method doesn't work, it's still moving.

The drawing habits here are not very good. If there are identical parts in the schematic, they are directly copied and pasted. If the PCB board has the same appearance, the identical parts of the schematic are directly copied, and the PCB does not need to be redesigned. The bad thing is that when copying different schematics, the component numbers are not continuous. The problem of duplicate component ID numbers is that TVR is uniformly reset in the schematic.

This problem of device shifting will occur if the component numbers are changed continuously.

okhxyyo

Alas, published on 2021-3-8 10:10 This method doesn't work, it's still moving. I'm not very good at drawing here. I just copy and paste the same parts of the schematics, and the PCB boards have the same appearance...

Then you can try another method: first run the project menu-component link in the pcb editing interface, and then use the schematic diagram to update the pcb.

okhxyyo

This is the location

okhxyyo

AD is easy to get started with, but it does have a lot of problems.

呜呼哀哉

okhxyyo posted on 2021-3-8 10:23 This is the location

Thank you so much.

This method is feasible, as long as the changes are matched, and the rest is straightforward, it's great.

okhxyyo

Wuhuaizai published on 2021-3-8 10:46 Thank you very much. This method is feasible, as long as the changes are matched, and the rest are more direct, very good.

That's good.

qwqwqw2088

okhxyyo posted on 2021-3-8 10:23 This is the location

This method is good

annysky2012

okhxyyo posted on 2021-3-8 10:23 This is the location

Guan Guan is so awesome~~~

okhxyyo

annysky2012 posted on 2021-3-8 12:53 Guanguan is so awesome~~~

Shame. I used to be a PCB worker.