How to choose and use 2.4G antenna applications?

Jacktang

How to choose and use 2.4G antenna applications? [Copy link]

First, 2.4GHz WiFi or Bluetooth antennas are universal.
Second, it is strongly recommended to refer to TI DN035, “Antenna Selection Quick Guide”. This document contains links to corresponding documentation for each antenna.
Finally, the size of the antenna itself and the surrounding ground must strictly follow the instructions in the reference design or specification book.

Jacktang

How does the C2xxx transmit an unmodulated carrier?

Unmodulated carrier is generally used to measure frequency error. Using the graphical interface PC tool SmartRF Studio, you can directly select Unmodulated under Continuous Tx. If you do not use the PC tool control and transmit directly after power-on, you need to run the corresponding Strobe Command directly after power-on in the program. This command can be found in the User Guide of the corresponding chip.

ZXopen

Very good, useful

freebsder

Thanks for sharing, it would be best if you could include attachments.