Network port problem

chenbingjy

Network port problem [Copy link]

I use a network port in my project. I wrote the program with STM32F767 and used VB for the upper computer. The lower computer collects encoder data and force value data, and sends it once every 50ms on average, with less than 20 data sent each time. But there is a problem. It often stops automatically while sending. I need to restart the microcontroller to resend. I would like to ask the experts, has anyone encountered this problem? How to solve it? Thank you!

btty038

If the working state is stopped, it is possible that something else is interfering with the microcontroller during operation, impacting the microcontroller, or there is a problem with the microcontroller itself, power supply noise in the peripheral circuit, from an objective perspective of an outsider: lol