[NXP Rapid IoT Review] + Finally climbed out of the pit (Second week review summary)

hujj

[NXP Rapid IoT Review] + Finally climbed out of the pit (Second week review summary) [Copy link]

    It has been exactly 14 days since I got the kit. Recently, I have been confused about the fact that the mobile phone APP cannot obtain the data information of the kit sensor. After repeated connection attempts, I found that the mobile phone APP can search for the kit through Bluetooth, but it cannot receive the sensor data information. For this reason, I also posted a special post for help. With the help of the forum friends, I found that as long as the kit is in the lowest interface (I entered the temperature display interface), the sensor data information can be correctly obtained by adding the device. The entire adding process usually takes only 1 to 2 minutes to complete. This is my biggest gain this week. Now, as long as the connection is not normal (usually the kit has been restarted), I delete the device and add it again. I don’t know if other forum friends do the same. The second thing I did this week was to add an external lithium battery to the kit. I used the battery of the original elderly phone and connected it to the kit through a homemade card holder, which completely solved the problem of the battery life of the kit. As long as the battery is charged at night, it can be used for a whole day. For detailed process, see this post https://bbs.eeworld.com.cn/forum ... 6926&fromuid=709956.