1. If the MCU has a serial port peripheral, plus a level conversion chip, such as MAX232, SP3485, it is an RS232 and RS485 interface.2. RS485 uses differential signal negative logic, +2~+6V represents
[table=98%] [tr][td]1.What is the function of the cut-off frequency parameter in the ST motor library? [/td][/tr] [/table] [img=419,0]http://www.ing10bbs.com/data/attachment/forum/201812/19/193031cfii
I am writing something about interrupts because of DC's invitation. I have only been in contact with 430 for a short time and can only share my own experience with you. Please forgive me if there are
Chemical composition during battery manufacturing is a time-consuming process involving multiple charging and discharging to activate the battery's chemical properties, and is particularly critical to
Only DIN and GND are used to drive WS2812. You need to make some changes to the light strip, connect a Schottky diode between DIN and VCC, and then connect a 10uF capacitor in parallel.From: https://g