Fujitsu FRAM experience submission STM32 IO simulation driver RS64 has always failed. Using the same program, only the chip select CS is different. The ID of W25X16 is correct, but there is a problem
[align=left][color=#333333][font=Arial][size=14px]Compared to i.MX6UltraLite, i.MX6ULL is mainly optimized for cost. It is PIN-2-PIN compatible with i.MX6UltraLite chip, making it easy to reuse i.MX6U
Dear experts, I have a question. The DSP used in the current project requires a 1.3V clock. I have a 3.3V crystal oscillator on hand, and use output voltage division to achieve 1.3V. The crystal oscil
always @ (posedge clock) if(reset == 1) begin for(k=1; k<=order; k=k+1) Samples[k] <= 0; end else begin Samples[1] <= Data_in; for(k=2; k<=order; k=k+1) Samples[k] <= Samples[k-1]; end For the value o
Hardware conditions: s3c2410 CPU, nand flash k9f1208 Problem: Vivi-bootloader can download the program through jtag, and CPU and nand flash can be detected before downloading. However, after downloadi