The CMD file is a linker command file (Linker Command File) with the suffix .cmd.Before analyzing cmd files, you must first understand(1) the memory map of the DSP chip (Memory Map)(2) the knowledge o
My power input is 4 dry batteries totaling 6V, which are used to stabilize the voltage of AMS1117-3.3 to 3.3V. Previously, the input and output of the voltage regulator were connected to filter capaci
Hello everyone, I am using a high-frequency transistor as a diode to limit a signal, as shown in Figure 3, the input signal is shown in Figure 2, and the output signal is shown in Figure 1. I have nev
I designed a low-power product using Bluetooth 4.0. The CSR1010 chip used has a transmit power of +4dBm and a broadcast interval of 60mS. According to CSR testing, the radio power consumption is about