In 4.2 platform, registering interrupts requires modifying oalintr.h and armint.c. Is it possible to do these operations directly inside the driver, that is, to allow users to register interrupts in t
[i=s] This post was last edited by freebsder on 2017-12-19 18:43 [/i] [align=left][font=宋体][size=4]To be continued. Previously, I briefly analyzed the small board in this review and briefly outlined t
[size=4] The ubiquitous adoption of video and still images, as well as the growing demand for configurable systems such as software radio, continue to drive the expansion of DSP applications. Many app
I connected a MC35IT to the PC serial port and wanted to use AT commands to dial up the GPRS network, but failed. The results are as follows: OK at+cgatt=1 OK at+cgdcont=1,"ip","cmnet" OK at+cgact=1 O