When Xianji's dual-core 800MHz RISC-V first came out, it was targeted because of its domestic production, high performance, and low price. Although everyone is not familiar with Xianji, the film looks very good. I read the reviews of a small group of front-line engineers on the forum. Share and test it more delicious~ In order to let more engineers get to know this "legendary domestic MCU" in depth, EEWorld specially invited Xianji to conduct a live broadcast on the theme of HPM6750 to demonstrate its strength in real time: a single chip controls 4 servo motors + LCD? So easy~ These only use 50% of the computing power, and half of the computing power is still "sleeping". You can also use the serial port, CAN and Gigabit Ethernet supporting 1588 at the same time to implement more applications...
Fujitsu FRAM experience submission STM32 IO simulation driver RS64 has always failed. Using the same program, only the chip select CS is different. The ID of W25X16 is correct, but there is a problem
[align=left][color=#333333][font=Arial][size=14px]Compared to i.MX6UltraLite, i.MX6ULL is mainly optimized for cost. It is PIN-2-PIN compatible with i.MX6UltraLite chip, making it easy to reuse i.MX6U
Dear experts, I have a question. The DSP used in the current project requires a 1.3V clock. I have a 3.3V crystal oscillator on hand, and use output voltage division to achieve 1.3V. The crystal oscil
always @ (posedge clock) if(reset == 1) begin for(k=1; k<=order; k=k+1) Samples[k] <= 0; end else begin Samples[1] <= Data_in; for(k=2; k<=order; k=k+1) Samples[k] <= Samples[k-1]; end For the value o
Hardware conditions: s3c2410 CPU, nand flash k9f1208 Problem: Vivi-bootloader can download the program through jtag, and CPU and nand flash can be detected before downloading. However, after downloadi