This session will talk about the different types of motors used in the industry; DC, Brushless DC, Steppers, Permanent Magnet Synchronous, and AC Induction. To gather a better understanding of motors, differences of these motors with advantages and disadvantages of each will be shown. Basic motor drive circuits will be discussed from full H-Bridge drive to half-bridge for 3-phase motors. Other drive concepts such as 6-step commutation along with drive issues such as current recirculation will be discussed. Field Oriented Control will also be discussed and how it has progressed with improving technology. This session will end with how to implement a motor control application using TI solutions from analog products, digital controllers and software to precisely control the position, velocity and torque of mechanical drives.
I used PB5.0 to customize a BSP based on CEPC-X86, in which I installed the TOUCH DRIVER of ETTI TOUCH BOARD. However, after porting to the platform, I cannot use TOUCH. I would like to ask what went
//Independent button program//p1.0 is LED, p1.3 is button#include "msp430g2553.h" int main( void ) { // Stop watchdog timer to prevent time out reset WDTCTL = WDTPW + WDTHOLD;//Watchdog does not expla
Unexpected Fated Error Encountered which may have been caused by a stack overflow out of memory condition, or access violating, I am try and save your work before terminating this application.After do
I want to do RAID5 on a Dell 2600 server. Now I want to add three hard disks. How do I do it? 1. Are there any special requirements for adding these three hard disks to the server? Is it the same as a
I am using MSP430 to make an intelligent temperature controller. Now the P1 port is connected to a 4X4 keyboard. As long as a key is pressed, an interrupt will be entered. I hope to change the value o