R1114x SERIES
LOW NOISE 150mA LDO REGULATOR
NO.EA-094-111026
OUTLINE
The R1114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply
current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an
error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the R1114x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5,
SC-82AB, and SON1612-6 therefore high density mounting of the ICs on boards is possible.
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Supply Current ..................................................................... Typ. 75μA
Standby Mode ...................................................................... Typ. 0.1μA
Dropout Voltage ................................................................... Typ. 0.22V (I
OUT
=150mA 3.0V Output type)
Ripple Rejection................................................................... Typ. 70dB (f=1kHz 3.0V Output type)
Typ. 60dB (f=10kHz)
Temperature-Drift Coefficient of Output Voltage .................. Typ.
±100ppm/°C
Line Regulation .................................................................... Typ. 0.02%/V
Output Voltage Range.......................................................... 1.5V to 4.0V (0.1V steps)
(
For other voltages, please refer to MARK INFORMATIONS.)
Output Voltage Accuracy......................................................
±2.0%
Packages ............................................................................ SON1612-6, SC-82AB, SOT-23-5
Built-in Fold Back Protection Circuit .................................... Typ. 40mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC ... C
IN
=C
OUT
=1μF
(V
OUT
<2.5V)
C
IN
=1μF,
C
OUT
=0.47μF
(V
OUT
>
2.5V)
=
APPLICATIONS
•
Power source for portable communication equipment.
•
Power source for electrical appliances such as cameras, VCRs and camcorders.
•
Power source for battery-powered equipment.
1
R1114x
SELECTION GUIDE
The output voltage, auto discharge function, package, and the taping type, etc. for the ICs can be selected at
the user’s request.
Product Name
R1114Dxx1∗-TR-FE
R1114Qxx1∗-TR-FE
R1114Nxx1∗-TR-FE
Package
SON1612-6
SC-82AB
SOT-23-5
Quantity per Reel
4,000 pcs
3,000 pcs
3,000 pcs
Pb Free
Yes
Yes
Yes
Halogen Free
Yes
Yes
Yes
xx : The output voltage can be designated in the range from 1.5V(15) to 4.0V(40) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗
: CE pin polarity and auto discharge function at off state are options as follows.
(A) "L" active, without auto discharge function at off state
(B) "H" active, without auto discharge function at off state
(D) "H" active, with auto discharge function at off state
3
R1114x
ABSOLUTE MAXIMUM RATINGS
Symbol
V
IN
V
CE
V
OUT
I
OUT
P
D
Input Voltage
Input Voltage (
CE
or CE Pin)
Output Voltage
Output Current
Power Dissipation (SON1612-6)
∗
Power Dissipation (SC-82AB)
∗
Power Dissipation (SOT-23-5)
∗
Topt
Tstg
Operating Temperature Range
Storage Temperature Range
Item
Rating
6.5
6.5
−0.3~V
IN
+0.3
200
500
380
420
−40~85
−55~125
°C
°C
mW
Unit
V
V
V
mA
∗)
For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
5
Test/Measurement
京公网安备 11010802033920号
EEWORLD
