The R1S and R1D converters are of the enclosed open frame type, i.e. they are not potted.
The converters are typically used in general purpose and industrial low power isolation and
voltage matching applications where an SMD converter is required.
The converter series feature an extended ambient temperature operating range of
-40°C to +100°C without derating and optional continuous short circuit protection.
In addition to two isolation options and three different case formats, the converters are also
available prepacked as tape and reel for use with automatic insertion machines.
1 Watt SMD
Single
&
Dual
Output
Selection Guide
Part
Number
SMD
R1S**-xx3.3
R1S**-xx05
R1S**-xx09
R1S**-xx12
R1S**-xx15
R1S**-xx24
R1D**-xx3.3
R1D**-xx05
R1D**-xx09
R1D**-xx12
R1D**-xx15
R1D**-xx24
Input
Voltage
(VDC)
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
3.3, 5, 12, 15, 24
Output
Voltage
(VDC)
3.3
5
9
12
15
24
±3.3
±5
±9
±12
±15
±24
Output
Current
(mA)
303
200
111
84
66
42
±152
±100
±56
±42
±33
±21
Efficiency
(%)
75
72-78
74-78
75-80
75-82
74-84
75
72-78
74-78
75-80
75-82
74-84
Max
Capacitive
Load
(1)
2200µF
1000µF
1000µF
470µF
470µF
220µF
±1000µF
±470µF
±470µF
±220µF
±220µF
±100µF
2011/65/EU
6/6
(3kV)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
(H)
RoHS
E358085
UL-60950-1 Certified
EN-60950-1 Certified
EN-60601-1 Certified*
(
*/H suffix)
xx = Input Voltage (other input and output voltage combinations available on request)
* add Suffix “H” for 3kV Isolation, e.g.
R1S-0505/H, R1D-0505/H
,
R1S12-0505/H, R1D12-0505/H
* add Suffix “P” for Continuous Short Circuit Protection, e.g.
R1S8-0505/P, R1S-0505/H
P,
R1D12-0505/HP
* add suffix -R for tape & reel packing e.g.
R1S-0505-R.
For more details see Application Notes.
R1S_R1D
Derating-Graph
(Ambient Temperature)
Case and Pinning Options (note restrictions on /H option)
R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
100
80
Specifications
(
measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Output Power (%)
Input Voltage Range
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
All Variants
3.3V output types
5V output type
9V output type
12V, 15V, 24V output types
Output Ripple and Noise (20MHz BW limited)
Operating Frequency
±10%
±2% typ., ±5% max.
1.2%/1% of Vin typ.
15% typ., 20% max.
12% typ., 15% max.
7% typ., 10% max.
6% typ., 10% max.
50mVp-p typ., 100mVp-p max.
20kHz min. / 60kHz typ. / 100kHz max.
continued on next page
60
40
20
0
Safe Operating Area
-40
100
105
Operating Temperature °C
0
50
150
E-24
REV: 1/2016
www.recom-power.com
ECONOLINE
DC/DC-Converter
Specifications
(
measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Efficiency at Full Load
Minimum Load = 0%
Isolation Voltage
Isolation Voltage
Isolation Capacitance
H-Suffix
H-Suffix
R1S_R1D
Series
(tested for 1 second)
(rated for 1 minute***)
(tested for 1 second)
(rated for 1 minute***)
R1S, R1S8, R1D, R1D10
R1S12, R1D12
See Selection Guide
Specifications valid for 10% minimum load only.
1000VDC
500VAC / 60Hz
3000VDC
1500VAC / 60Hz
15pF min. / 70pF max.
10pF min. / 75pF max.
10 GΩ min.
1 Second
Continuous
-40°C to +100°C (see Graph)
-55°C to +125°C
245°C (30 sec), Peak 255°C (5 sec) max.
230°C (90 sec) max.
95% RH
1000 hrs / 90% humidity / +85°C ambient
1.0g
1.1g
1.2g
40 pcs per Tube
33 pcs per tube
500 pcs per Reel
4275 x 10
3
hours
1365 x 10
3
hours
IEC 60950-1:2001 1st Ed.
UL 60950-1 2nd Ed.
C22.2 No. 60950-1-03
IEC/EN 60601-1 3rd Edition
EN60950-1: 2006 + A12:2011
Level A
Isolation Resistance
Short Circuit Protection
P-Suffix
Operating Temperature Range (free air convection)
Storage Temperature Range
Reflow Temperature
ROHS compliant
Vapor Phase Process
(for more details see Application Notes)
Relative Humidity
Humidity Susceptibility Test
Package weight
R1S
R1S8
R1S12, R1D, R1D10, R1D12
Packing Quantity
R1S, R1S8
R1S12, R1D, R1D10, R1D12
All Types
MTBF (+25°C)
using MIL-HDBK 217F
Detailed Information see
Application Notes chapter "MTBF"
(+85°C)
using MIL-HDBK 217F
Certifications
CB Test Report
Report: US/14402A/UL
UL General Safety
Report: E358085
CUL General Safety
EN Medical Safety
Report: MDD1205098-2 + RM1205098-2
Medical Report + ISO14971 Risk Assessment
EN General Safety
Report: SPCLVD1211033-3
Conducted / Radiated Emissions
EN55022
}
R1S-R1D
***Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes.
Notes
Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.
Typical Characteristics
R1S**-xx05
Efficiency / Load
100
80
R1D**-xx05
Efficiency / Load
100
80
60
3.305
1205
0505
1205
Tolerance Envelope
+5%
V Nom.
Typical L
o
Efficiency %
60
40
0505
Efficiency %
+10%
ad Line
40
20
0
+5%
1%
5%
20
0
3.305
Output Voltage
0%
40%
20%
60%
Total Output current (%)
80%
100%
0% 20%
40%
60%
Total Output current (%)
80%
100%
Deviation / Load
25.000
20.000
Deviation / Load
25.000
20.000
Deviation from Nominal (%)
10%
50%
100%
15.000
10.000
5.000
0.000
-5.000
-10.000
Deviation from Nominal (%)
3.305
0505
15.000
10.000
5.000
0.000
-5.000
-10.000
3.305
0505
Output Load Current (%)
1205
0% 20%
40%
60%
Total Output current (%)
80%
100%
1205
0% 20%
40%
60%
Total Output current (%)
80%
100%
www.recom-power.com
REV: 1/2016
E-25
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
R1S_R1D
Series
Note: /H option is available in
these pin packages
6 PIN Dual SMD Package
5 PIN Single SMD Package
12.75
10.7
8
5
10
7
RECOM
R1D-xxxx
xxxx
RECOM
R1S-xxxx
xxxx
15.24
10.7
6.7
2.54 x 3
7.0
8.50
11.10
6.7
2.54x4
7.0
8.50
11.10
1 2
4
1 2
4 5
Pin Connections
Recommended Footprint Details
0.50
12.00
8
Top View
Pin #
1
2
4
5
7
Single
–Vin
+Vin
–Vout
+Vout
No Pin
NC
No Pin
Dual
–Vin
+Vin
Com
–Vout
+Vout
No Pin
NC
Bottom View
Recommended Footprint Details
0.50
12.00
10
Top View
5
4
1.80
7
Bottom View
1 2
1 2
4 5
1.80
2.54
1.20
8
10
2.54
1.20
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
8 PIN Single SMD Package
Note: /H option is not available in
these pin packages
10 PIN Dual SMD Package
R1S-R1D
12.75
10.7
8 7 6 5
10 9 8 7 6
RECOM
R1D10-xxxx
xxxx
RECOM
R1S8-xxxx
xxxx
15.24
10.7
6.7
2.54 x 3
7.0
8.50
11.10
6.7
2.54x4
7.0
8.50
11.10
1 2 3 4
1 2 3 4 5
Pin Connections
Pin #
1
Single
–Vin
+Vin
NC
–Vout
+Vout
NC
NC
NC
-
-
Dual
–Vin
+Vin
NC
Com
–Vout
NC
+Vout
NC
NC
NC
Recommended Footprint Details
0.50
12.00
8 7 6 5
Top View
2
3
4
5
6
7
Recommended Footprint Details
0.50
12.00
10 9 8 7 6
Top View
Bottom View
1 2 3 4
1.80
Bottom View
1 2 3 4 5
1.80
2.54
1.20
8
9
10
2.54
1.20
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
E-26
REV: 1/2016
e.g. R1S-0505, R1S-0505/H, R1S-0505/HP
e.g. R1S8-0505, R1S8-0505/P
e.g. R1D-0505, R1D-0505/H, R1D-0505/HP
e.g. R1D10-0505, R1D10-0505/P
www.recom-power.com
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
12 PIN Single and Dual SMD Package
Note: /H option is available in
this pin package
R1S_R1D
Series
15.24
10.7
Pin Connections
12 11 10
RECOM
xxxx
8 7
6.7
2.54x5
7.0
8.50
11.10
Recommended Footprint Details
R1S_R1D12-xxxx
Pin #
1
2
3
5
6
7
8
10
11
12
Single
–Vin
+Vin
NC
–Vout
NC
NC
+Vout
NC
NC
NC
Dual
–Vin
+Vin
NC
Com
–Vout
NC
+Vout
NC
NC
NC
1 2 3
5 6
Separation
> 3.8 mm
0.55
12.00
12 1110
1 2 3
Top View
NC = No Connection
8 7
5 6
1.80
Bottom View
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
1.20
R1S** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
R1D** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
e.g. R1S12-0505, R1S12-0505/H, R1S12-0505/HP
e.g. R1D12-0505, R1D12-0505/H, R1D12-0505/HP
EMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted)
R1S-R1D
470pF/4kVDC
Fuse
Input
L1
Output
+
DC
C1
DC
Standard and /H versions
C1
L1
Vin
4.7µF 3.3µH
3.3V
2.2µF 4.7µH
5V
2.2µF 10µH
12V
2.2µF 22µH
15V
4.7µF 22µH
24V
470pF/4kVDC
Fuse
Input
L1
+Vout
/P and /HP versions
C1
L1
Vin
4.7µF 10µH
3.3V
10µF 10µH
5V
4.7µF 22µH
12V
4.7µF 22µH
15V
10µF 47µH
24V
+
DC
C1
DC
Com
-Vout
C1 = MLCC
L1 = SMD Inductor
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
It's time to hand in homework again today! The demo I made today is to use the EC-01F-Kit, an Essence NB-IOT development board, to connect to Alibaba Cloud.Alibaba Cloud ConfigurationAlibaba Cloud has...
As shown in the figure, Vin input is 7~12V;
R3=9k ohm, R6=1K ohm;power chip XL6008 (Xinlong), FB pin voltage VFB=1.25. (Measured VFB=1.248V);theoretical output Vo=(1+R3/R6)*1.25=12.5V, but the measure...
I would like to ask, after adding two diodes to compensate for this push-pull output circuit, a slight phase shift occurs. How can I solve this problem?...
I participated in electronic design competitions when I was in school, but I didn't get any results. Later, I led a team to participate in several competitions after I started working. Overall, my exp...
There are many ways to debug MCU programs, such as software/hardware simulation, adding data printing, etc.Keil MDK, for example, supports software simulation of many microcontrollers. Without getting...
Test/Measurement
京公网安备 11010802033920号
EEWORLD
