This product specification defines the performance, test, quality and reliability requirements of ExpressCard
module card kit.
2.0
SCOPE
This product specification is applicable to provide information regarding product feature, material of
ExpressCard module card kit, and all products shall meet ExpressCard Standard, PCMCIA/JEITA.
2.1 ABBREVIATIONS:
PCMCIA
JEITA
PCI
PCI Express
USB
Personal Computer Memory Card International Association
Japan Electronics and Information Technology Industries Association
Peripheral Component Interface
A scaleable full-simplex serial bus standard which operates at 2.5Gbps and
offers both asynchronous and isochronous data transfers
Universal Serial Bus
3.0
GENERAL
This document is composed of the following sections:
1.0
2.0
OBJECTIVE
SCOPE
2.1
3.0
4.0
ABBREVIATIONS
GENERAL
APPLICABLE DOCUMENTS
4.1
4.2
4.3
ExpressCard Standard
PC Card Standard
Other Standard and Specification
5.0
REQUIREMENTS
5.1
5.2
5.3
5.4
General Description
Material
Cosmetic Requirements
Dimensions
6.0
CARD KIT PERFORMANCE
6.1
Environmental Performance
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
Form E-3005
Rev A 02/12/01
V20603
GS-01-001
PDS: Rev :C
STATUS:Released
Printed: Mar 06, 2014
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
GS-12-292
REVISION
2 of 14
C
DATE
ExpressCard Module Card Kit
AUTHORIZED BY
SH MIAO
CLASSIFICATION
2011-05-29
UNRESTRICTED
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.1.7
6.1.8
6.2
Operating Environment
Storage Environment
High Storage Temperature
Low Storage Temperature
High Operating Temperature
Low Operating Temperature
Thermal Shock
Moisture Resistance
Mechanical Performance
6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
Test Sequence
Vibration and High Frequency
Shock
Bend Test
Torque Test
Drop Test
6.3
Electrical Performance
6.3.1
6.3.2
6.3.3
6.3.4
6.3.5
Contact Resistance between Module Card Kit and Ground
Life Cycle Testing in Office Environment
Electrostatic Discharge
Electromagnetic Field Interference
Insulator
7.0
4.0
REVISION HISTORY
APPLICABLE DOCUMENTS
4.1 ExpressCard Standard Release 1.0 of December 2003.
4.2 PC Card Standard: Volume 3 (Physical Specification) Release 8.0 of April 2001.
4.3 Other Standard and Specification:
4.3.1 International Standard IEC 512, Electromechanical components for electronic equipment; basic
testing procedures and measuring methods.
4.3.2 EIA-364, Electrical connector/socket test procedures including environmental classifications.
4.3.3 MIL-STD-202, Military Standard, test method for electronics and electrical component parts.
5.0
REQUIREMENTS
5.1 General Description:
There are two formats of the standard ExpressCard module card kit herein, the ExpressCard/34 module
characterized by its 34mm width and the ExpressCard/54 module characterized by its 54mm width.
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
Form E-3005
Rev A 02/12/01
V20603
GS-01-001
PDS: Rev :C
STATUS:Released
Printed: Mar 06, 2014
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
GS-12-292
REVISION
3 of 14
C
DATE
ExpressCard Module Card Kit
AUTHORIZED BY
SH MIAO
CLASSIFICATION
2011-05-29
UNRESTRICTED
Each format consists of two stainless steel card shields, one (two) plastic end cap, and one 26 position
SMT receptacle connector.
FCI manufactures the ExpressCard module card kit without PCB. For this reason, this FCI specification
will only cover the specifications of the “empty” card kit, except for vibration, bend, torque and shock
tests. It is, in this area, different from the ExpressCard Standard and PC Card Standard.
The electrical tests need a PCB, In that case only, a dummy one is to be added on which a 26 position
SMT receptacle connector is soldered.
5.2 Material:
5.2.1 Receptacle Connector: Housing: High temperature thermoplastic, UL 94V-0 flame retardant.
Terminal: Copper Alloy, gold flash over contact area, lead-free soldering.
5.2.2 Metal Shield: SUS 304 Stainless Steel.
5.2.3 Plastic End Cap: ABS + PC, UL 94V-0 flame retardant.
5.3 Cosmetic Requirements:
The card shields must comply with the following cosmetic requirements:
Surface finish: matte / dull (not brushed).
The outside surfaces of the card shield must be free of scratches, dents, spots, finger prints,
cleaning residue or other irregularities.
The outside surfaces of plastic end cap must be free of scratches, flash, mark, blemish, protrusion,
weld-line, incomplete molding or other irregularities.
5.4 Dimensions:
The card kit dimensions must meet the requirements from the figures below, both for the
ExpressCard/34 card kit and the ExpressCard/54 card kit.
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
Form E-3005
Rev A 02/12/01
V20603
GS-01-001
PDS: Rev :C
STATUS:Released
Printed: Mar 06, 2014
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
GS-12-292
REVISION
4 of 14
C
DATE
ExpressCard Module Card Kit
AUTHORIZED BY
SH MIAO
CLASSIFICATION
2011-05-29
UNRESTRICTED
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
Form E-3005
Rev A 02/12/01
V20603
GS-01-001
PDS: Rev :C
STATUS:Released
Printed: Mar 06, 2014
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
GS-12-292
REVISION
5 of 14
C
DATE
ExpressCard Module Card Kit
AUTHORIZED BY
SH MIAO
CLASSIFICATION
2011-05-29
UNRESTRICTED
Figure: ExpressCard/34 Module Outline Dimensions
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
[i=s]This post was last edited by fish001 on 2020-7-21 22:51[/i]We introduce an active circuit, the operational amplifier, which has certain properties (high input resistance, low output resistance, a...
[i=s]This post was last edited by Eurasia32 on 2022-7-21 12:45[/i]Generally speaking, the communication interfaces that appear more frequently in microcontroller development are U(S)ART, SPI and I2C. ...
1. 4G/5GDTU/router, it is a wireless unlimited distance remote transmission method, it is based on the network of the three major operators for data transmission, supports public network transmission ...
"Wireless Communication Principles and Applications" (2nd Edition) is an authoritative and up-to-date textbook on wireless communication technology and system design. Since the first edition was publi...
According to multiple semiconductor industry sources, Samsung will increase the price of NAND flash memory chips by 10-20% in the fourth quarter of this year, and will increase by 20% in the first an...[Details]
With the continuous improvement of living standards, people's demand for wireless, networking, intelligent and energy-saving in daily life is becoming stronger and stronger. Traditional lighting cont...[Details]
On November 6, the first phase project of Hubei Xiongtao Lithium Battery was put into production, the second phase project was started, and the signing ceremony of the hydrogen energy project was g...[Details]
Let's prepare a PLC and communication first.
We need a PLC that supports Modbus RTU communication and a USB to serial cable.
Then prepare a tool software on the computer.
...[Details]
This experiment introduces how to use SDRAM, which requires setting 13 registers. Oh, don't worry, many of these registers are similar, and since we only use BANK6, we don't need to pay attenti...[Details]
As an important component of car functions and the finishing touch of the car body appearance, the most basic function of car lights is safety, but it is often overlooked by some drivers.
In fact...[Details]
On September 4, Lei Jun, founder, chairman and CEO of Xiaomi Group, demonstrated the Xiaomi Laboratory. Lei Jun said that this Xiaomi laboratory has 1,800 mobile phones for non-stop testing....[Details]
As the world's first A-class auto show this year, the ongoing Shanghai Auto Show is very exciting and lively. In the past few days, we have seen countless automakers at the Shanghai Auto Show bringin...[Details]
0 Introduction
Heavy vehicles have the characteristics of large total mass, complex operating conditions, and multiple gears. In order to reduce the difficulty of operation and labor intensity...[Details]
With the development of science and technology, more and more automated and intelligent products are entering people's lives. Smart homes are gradually replacing traditional homes and becoming an indu...[Details]
U-BOOT supports network functions. When downloading operating system kernels and large file systems, it is faster and more convenient than other boot loaders that do not support the network. At p...[Details]
Below are two common suffixes on the market: AVR MEGA8-16PU AVR MEGA8-16AU AVR MEGA8L-8PU AVR MEGA8L-8AU. The black part in front is the chip model, and the number behind it usually contains capacity...[Details]
November 4, 2024, Hong Kong, China -
OPPO Guangdong Mobile Communications Co., Ltd. (OPPO) and the Hong Kong Polytechnic University (PolyU) held a cooperation renewal ceremony to further deepen...[Details]
Security Electronics
京公网安备 11010802033920号
EEWORLD
