[i=s]This post was last edited by yang_alex on 2018-7-2 00:35[/i] The previous post talked about how to get the motor parameters. There are too many pictures, so the post is split. This post talks abo...
After setting the system environment variables, you only need to enter arm-openwrt-linux-gcc in the Linux terminal to call the cross compiler. There are 3 ways to set the system environment variables:...
I use LM2776 to generate -5V voltage. The problem now is that after power on, the output voltage of the place where -5V should be output is 0.67V; but after touching the -5 output pin with an oscillos...
The excellent design of the MSO6B series is oriented towards higher-speed embedded designs, meeting users' needs for mixed-signal design debugging and the ever-increasing serial bus speed.
Provide cut...