ES110 and ES120 Series
Packaged Temperature Probes
with Integral Connectors
DESCRIPTION
Honeywell’s ES110 Series and ES120 Series are a modular
range of inflow thermistor-based sensors specifically designed
for use in the transportation industry.
Thermistors can be very effective in sensing temperatures of
gases, liquids or solids because of their enhanced sensitivity,
accuracy and reliability.
The ES110 Series air/gas sensor has an exposed thermistor
element that offers enhanced response for greater levels of
control, while the ES120 Series is primarily used for immersion
temperature measurements. Its fully enclosed brass body
makes it often ideal for applications requiring direct contact
with liquids.
FEATURES
•
•
•
•
•
•
•
•
•
•
Air/gas or immersion sensing
NTC (Negative Temperature Coefficient) or KTY (silicon-
based positive temperature coefficient) type outputs
Enhanced sensitivity
Enhanced accuracy
Enhanced reliability
Robust packaging
Fast response
Wide operating temperature range
Easy installation
Customizable
•
•
POTENTIAL APPLICATIONS
Transportation: engine coolant, oil temperature, air intake,
fuel and engine block sensing
Industrial: compressor, duct, hydraulic oil temperature
sensing
Robust and easy-to-install threaded packaging often provides
reliable operation in harsh application environments. Fast
response times over a wide operating temperature range of
-40 °C to 150 °C [-40 °F to 302 °F] allow application flexibility.
Custom configurations are available.
Order Guide
Catalog Listing
ES110-0001
ES110-0004
ES110-0017
ES120-0001
ES120-0010
ES120-0024
ES120-0026
ES120-0029
ES120-0030
Description
ES110 Series air/gas temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M10x1.25), exposed thermistor tip, overmolded connector/2 Pin MINI TIMER
ES110 Series air/gas temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M10x1.25), shrouded thermistor tip, overmolded connector/2 Pin MINI TIMER
ES110 Series air/gas temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M12x1.5), exposed thermistor tip, overmolded connector/2 Pin MINI TIMER
ES120 Series immersion temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M10x1.0), overmolded connector/2 Pin MINI TIMER
ES120 Series immersion temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M14x1.5), overmolded connector/2 Pin MINI TIMER
ES120 Series immersion temperature probe, KTY, 2,000 Ohm, ±5.0% tolerance, 25 °C [77 °F] accuracy, brass, threaded
body (M12x1.5), overmolded connector/2 Pin MINI TIMER
ES120 Series immersion temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M10x1.25), overmolded connector/2 Pin MINI TIMER
ES120 Series immersion temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (1/8 PTF 27 TPI), overmolded connector/Delphi 90° METRI-PACK 150 Series
ES120 Series immersion temperature probe, NTC, 2,000 Ohm, ±5.0% tolerance, 20 °C [68 °F] accuracy, brass, threaded
body (M12x1.5), overmolded connector/2 Pin MINI TIMER
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective.
The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
•
WARNING
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail:
info.sc@honeywell.com
Internet:
www.honeywell.com/sensing
Phone and Fax:
+65 6355-2828
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
Asia Pacific
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
www.honeywell.com/sensing
009036-1-EN IL50 GLO Printed in USA
August 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
京公网安备 11010802033920号
EEWORLD
